Introduction
The Oasis water cooler is a state-of-the-art water cooler designed to provide clean and refreshing drinking water for businesses, schools, offices, and homes. It features advanced filtration technology that ensures only the freshest tasting water is dispensed.
The cooler’s unique design includes an insulated stainless steel tank that holds up to two gallons of water, a removable filter, and a UV Light to help ensure the highest quality drinking water. With its intuitive touch-screen controls, it’s easy to monitor how much water is left in the tank and make sure that everyone has access to cold, refreshing water anytime they want it.
The Oasis cooler also offers convenience features like an adjustable thermostat, push-button dispensing, and a lockable lid to help keep the water safe from tampering.
To keep your Oasis water cooler in top working condition, it’s important to clean and maintain the unit on a regular basis. This guide will cover the basics of how to clean your Oasis water cooler, including directions on how to properly open and close the unit, as well as tips on cleaning the interior and exterior.
Overview of how to clean oasis water cooler
Unplug the cooler from the wall and open the lid. Remove any debris or dirt that may have accumulated in the bottom of the unit. Clean the exterior of the cooler by wiping it down with a damp cloth or sponge and mild soap. Then, remove the inner filter and rinse it with cold water.
Drain the tank by opening the valve at the bottom of the cooler and pouring out any remaining water. Remove any dirt or buildup that has accumulated on the interior walls of the tank and wipe it down with a clean, damp cloth or sponge. Then, fill the tank with fresh water, add a few drops of bleach or white vinegar to the water, and swish it around. Rinse out the tank with cold water and replace the inner filter.
10 ways of how to clean oasis water cooler
1.Unplug the cooler and remove the bottle
Unplug the cooler from the wall and open the lid. Remove any debris or dirt that may have accumulated in the bottom of the unit .
Cleaning an Oasis water cooler is a simple process that only requires basic cleaning supplies and tools.
2.Drain any remaining water from the reservoir
Drain the tank by opening the valve at the bottom of the cooler and pouring out any remaining water. Use a damp cloth or sponge to remove any dirt or buildup that has accumulated on the interior walls of the tank.
3.Disassemble the cooler
Disassemble the Oasis water cooler by removing the lid, filter housing and tank. Remove the lid, filter, and any other removable parts from the cooler. Clean each part separately with a damp cloth or sponge and mild soap. Make sure to rinse off each part with cold water after cleaning.
4.Clean the removable parts
Clean the removable parts of the cooler, such as the power cord, thermostat control knob, and other small parts. Rinse out the tank with clean water to make sure all residual soap or bleach has been removed. Once everything is cleaned, reassemble the cooler and plug it back in. Turn on the power and check for any leaks around the tank or other areas.
5.Clean the inside of the cooler with a cleaning solution
Mix a cleaning solution of 1/4 cup white vinegar or 3 teaspoons of bleach to one gallon of hot water. Then, using a soft cloth or sponge, wipe down the interior walls and bottom of the cooler. Rinse out the tank with cold water and replace the inner filter. Avoid harsh cleaners or abrasive scrubbers as these can damage the finish of the cooler.
6.Scrub the exterior of the cooler
Wipe down the exterior of the cooler with a damp cloth or sponge and mild soap. This will help remove any dirt or grime that has accumulated over time. Using a damp cloth and mild soap, scrub the exterior of the cooler to remove any dirt or buildup. Rinse with cold water and dry completely.
7.Rinse all parts thoroughly
Once all parts of the cooler have been cleaned, thoroughly rinse them with cold water to remove any traces of soap or bleach. Dry with a soft cloth and put everything back together.
Rinse each component thoroughly with cold water to remove any soap residue. If there is any stubborn dirt or grime that won’t come off, use a soft-bristled brush and mild cleaning solution to help loosen it up.
8.Dry all parts
Dry all parts of the cooler . Once all the pieces have been rinsed off, use a soft cloth to dry each component. Make sure not to leave any excess water in or around the parts as this can cause corrosion and other damage. Dry all parts before reassembling. Dry them off with a soft cloth before reassembling the cooler.
9.Reassemble the cooler
Reassemble the cooler by reversing the process of how you disassembled it. Make sure all parts are securely put together and then plug in the power cord. Turn on the cooler and check for any leaks or other problems.
10.Sanitize the dispenser nozzle and drip tray
Once you’ve finished cleaning your Oasis water cooler, it’s important to sanitize the unit as well. To do this, mix a solution of one teaspoon of bleach to one gallon of hot water and use a soft cloth or sponge to thoroughly wipe down the interior and exterior surfaces. Rinse out the tank with cold water and replace the inner filter.
Conclusion:
Cleaning an Oasis water cooler is a simple process that only requires basic cleaning supplies and tools. By following these steps, you can easily keep your Oasis water cooler clean and functioning properly. It is important to remember to sanitize the unit after each use to ensure it stays free of bacteria or other contaminants. With regular maintenance, your Oasis water cooler will remain in top condition for many years.
If you have any questions or concerns about cleaning your Oasis water cooler, it is best to speak with a qualified technician before attempting any repairs or maintenance. Doing so will ensure that your cooler is properly and safely maintained.